High-temperature stainless steel cast iron gear oil pump
Contact Info
- Add:North Section of Industrial Road, Yutai County Economic Development Zone, Zip:
- Contact: 吴经理
- Tel:13012608150
- Email:15314489@qq.com
Other Products
The KCB-200 gear oil pump is suitable for conveying various types of oil, such as heavy oil, engine oil, and lubricating oil. When equipped with a copper gear, it can convey low-viscosity liquids such as gasoline and diesel, hence it is called a gear oil pump. A stainless steel gear pump can convey beverages and corrosive liquids. It is not suitable for liquids containing hard particles or fibers. The applicable viscosity range is 5×10⁻⁵～1.5×10³ m²/s, and the maximum allowable temperature is 70℃. If you need to convey high-temperature liquids, please use a high-temperature-resistant oil pump, which can convey liquids below 300℃.
II. Features of the KCB-200 Gear Oil Pump
1. Simple and compact structure, easy to use and maintain.
2. Has good self-priming performance, so it is not necessary to fill liquid before starting the pump each time.
3. Lubrication is automatically achieved by the conveyed liquid, so no additional lubricating liquid is required during daily operation.
4. Using an elastic coupling to transmit power can compensate for minor deviations caused during installation. It can also effectively buffer unavoidable hydraulic shocks during pump operation.
III. Working Principle of the KCB-200 Gear-Type Oil Pump
A pair of rotating gears is installed in the KCB-200 gear oil pump body, one driving gear and one driven gear. By meshing with each other, the entire working chamber inside the pump is divided into two parts: A is the suction chamber, and B is the discharge chamber. When the pump operates, the driving gear rotates the driven gear. When the gears disengage from meshing, a partial vacuum is formed in the suction side (A), and liquid is drawn in. The sucked liquid fills each tooth groove of the gears and is carried to the discharge side (B). When the gears engage, the liquid is squeezed out, forming high-pressure liquid that is discharged out of the pump through the pump's discharge port.
| Model | Flow Rate Q | Rotational Speed n (r/min) | Discharge Pressure p (MPa) | Required Net Positive Suction Head r (m) | Efficiency η (%) | Motor | ||
| m³/h | L/min | Power (kW) | Model | |||||
| KCB-18.3 2CY-1.1/1.45 |
1.1 | 18.3 | 1400 | 1.45 | 5 | 44 | 1.5 | Y90L-4 |
| KCB-33.3 2CY-2/1.45 |
2 | 33.3 | 1420 | 1.45 | 5 | 44 | 2.2 | Y100L1-4 |
| KCB-55 2CY-3.3/0.33 |
3.3 | 55 | 1400 | 0.33 | 7 | 41 | 1.5 | Y90L-4 |
| KCB-83.3 2CY-5/0.33 |
5 | 83.3 | 1420 | 0.33 | 7 | 43 | 2.2 | Y100L1-4 |
| KCB-135 2CY-8/0.33 |
8 | 135 | 940 | 0.33 | 5 | 46 | 2.2 | Y112M-6 |
| KCB-200 2CY-12/0.33 |
12 | 200 | 1440 | 0.33 | 5 | 46 | 4 | Y112M-4 |
| KCB-300 2CY-18/0.36 |
18 | 300 | 960 | 0.36 | 5 | 42 | 5.5 | Y132M2-6 |
| KCB-483.3 2CY-29/0.36 |
29 | 483.3 | 1440 | 0.36 | 5.5 | 42 | 7.5 | Y160M-4 |
| KCB-633 2CY-38/0.28 |
38 | 633 | 970 | 0.28 | 6 | 43 | 11 | Y160L-6 |
| KCB-960 2CY-58/0.28 |
58 | 960 | 1470 | 0.28 | 6.5 | 43 | 18.5 | Y180M-4 |
| KCB-1200 | 72 | 1200 | 740 | 0.6 | 7 | 43 | 37 | Y280S-8 |
| KCB-1600 | 95 | 1600 | 980 | 45 | Y280S-6 | |||
| KCB-1800 | 112 | 1800 | 740 | 0.6 | 7.5 | 43 | 55 | Y315S-8 |
| KCB-2500 | 150 | 2500 | 985 | 75 | Y315S-6 | |||
| KCB-2850 | 170 | 2850 | 740 | 0.6 | 8 | 44 | 90 | Y315L1-8 |
| KCB-3800 | 230 | 3800 | 989 | 110 | Y315L1-6 | |||
| KCB-4100 | 245 | 4100 | 743 | 0.6 | 8 | 44 | 132 | Y355M1-8 |
| KCB-5400 | 325 | 5400 | 989 | 160 | Y355M1-6 | |||
| KCB-5600 | 330 | 5600 | 744 | 0.6 | 8 | 44 | 160 | Y355M2-8 |
| KCB-7600 | 460 | 7600 | 989 | 200 | Y355M3-6 | |||
| KCB-7000 | 420 | 7000 | 744 | 0.6 | 8 | 44 | 185 | Y355L1-8 |
| KCB-9600 | 570 | 9600 | 989 | 250 | Y355L2-6 | |||
| Industry Category | Machinery & Equipment/General Mechanical Parts/Pumps |
|---|---|
| Product Category | |
| Brand: | |
| Spec: | |
| Origin: | 113708 |
